MSA Safety

MSA offers a complete line of calibration gas cylinders to calibrate all instruments. The gas mixture in calibration gas cylinders is certified to be prepared gravimetrically, using NIST traceable weights. The lot number and nominal value of the gas...

Outfitted with rapid-response MSA XCell sensors, the ALTAIR 4XR Gas Detector is the toughest 4-gas monitor on the market and is backed by a 4-year warranty.RuggedSurvives 25 drops from 4 feet (1.2 meters) (MIL-STD-810G 516.6 Transit Drop 3rd Party...

Introducing the ALTAIR 2X gas detector from MSA Safety; the first single gas detector that incorporates industry-leading X-cell® sensor technology in order to deliver unparalleled performance while drastically minimizing total cost of ownership,...

The ALTAIR 5X Multigas Detector for LEL, O2, CO, H2S, PID and toxic gas detection is as tough and functional as it looks. A rugged, rubberized polycarbonate housing provides unsurpassed durability, including the ability to survive a 10-foot drop. Inside,...

ALTAIR 4/4X/4XR Test Stand, Single Valve, w/ Single Unit Charger (Model #10128630) This is the single valve test stand for the ALTAIR 4, 4X, and 4XR gas detectors made by MSA Safety. They offer high performance as stand-alone units where each test...

The Electronic Cylinder Holder (Part #10105756) by MSA Safety is made for use with MSA's GX2 automated testing systems. The electronic Cylinder Holder is designed to read a Radio Frequency Identification (RFID) tag embedded in a plastic ring on MSA test...

The ALTAIR 5X Gas Detector is capable of measuring up to 6 gases simultaneously and is now available with integrated PID sensor for VOC detection. Driven by advanced MSA XCell Sensor Technology,  the ALTAIR 5X Gas Detector delivers  faster response time,...

Need your company logo? The MSA V-Gard Fas-Trac III 4-Point Ratchet Slotted Protective Cap features the distinctive trademark "V" design and is a world recognized brand known for comfort, quality, and durability. V-Gard® caps consist of high density...

Building upon decades of sensor design experience, MSA has revolutionized sensor technology with design breakthroughs that improve performance. The MSA Standard ALTAIR® 5X Multigas Detector with 1' Probe detects LEL/O2/CO/H2S, UL gases. Included is the...

Gas Mix: 1.45% Methane (CH4), 15% Oxygen (O2), 60 ppm Carbon Monoxide (CO), 20 ppm Hydrogen Sulfide (H2S) MSA offers a complete line of calibration gas cylinders to calibrate all instruments. Gas mixtures in calibration gas cylinders are certified...

ALTAIR 4XR Multigas Detector (Model #10178557) with sensors for LEL, O2, H2S, & CO. In the Box (1) Charcoal Case (1) North American Charger (1) ALTAIR 4XR Multigas Detector (4) Sensors (LEL, O2, H2S & CO) MSA Safety's ALTAIR 4XR...

The MSA Altair 5X Multigas Detector offers innovative technology to enhance performance and prolong the life of the instrument. Virtually every feature is improved, from the casing to the hardware. XCell sensor technology makes it easy to swap out...

Need your company logo? The MSA V-Gard® 500 Fas-Trac® III 4-Point Ratchet Vented Hard Hat features a distinctive trademark "V" design and is a world recognized brand known for comfort, quality, and durability. MSA V-Gard® 500 Series...

V-Gard Accessory System Kits are designed to offer easy customer solutions for a variety of needs, all in one convenient box.V-Gard Cap and Accessory System Kit contents: White V-Gard Cap with ratchet suspension V-Gard Frame for Slotted Caps V-Gard PC...

Need your company logo on this hard hat? The MSA V-Gard® 500 Fas-Trac® III 6-Point Ratchet Vented Hard Hat features a distinctive trademark "V" design and is a world recognized brand known for comfort, quality, and durability. MSA...

Simple, accurate calibration is easy with these economical, all-in-one kits. Kits can accommodate 2 cylinders, regulators, tubing, accessories and instructions. All kits housed in a lightweight carrying case, making it convenient to carry everything...

The MSA V-Gard Liner Knit Cap delivers extra warmth and protection under safety helmets. The V-Gard Knit Cap is a stylish skullie cap that prevents liner from obstructing vision. Made from 100% high bulk acrylic. Works with any MSA V-Gard hard hat...

MSA's Replacement Battery Pack (Model: 10114835) is great if you need to replace your current gas detection system's battery or if you want to keep a spare battery on hand.For Use With Models: 10116924, 10116925, 10116924, 10116927, 10116928, 10116929 6...

Provides an excellent method for wiping and refreshing respirators, hardhats, and other safety equipment between full cleaning periods. Box of 100, individually wrapped. Box of 100 Pre-Moistened Towelettes Great for Wiping and Refreshing all Equipment

Ensuring your workforce consistently wears their safety helmets can be challenging. MSA, the leading provider of protective helmets, offers the perfect solution: the Fas-Trac® III Suspension. Say goodbye to pressure headaches, pulled hair, and helmets...

The Swing-Ratchet provides a wrap around head band providing you with a more comfortable and secure fitting hard hat. Protective properties of hard hats and suspensions will degrade over time due to normal wear and tear. Adverse conditions such as...

MSA’s ALTAIR Single-Gas Detectors provide over two years of maintenance-free performance (depending upon alarm time used). These single-gas detectors are long-lasting, cost-effective, and offer outstanding dust and water protection while featuring a...

Replaces suspension for MSA Staz-On V-Gard® hard hats. Staz-on suspension is comfortable and form fitting to any users head. MSA recommends that replace your suspension every 18 months. This is due to normal wear and tear, exposure to adverse...

Working at heights? MSA's V-Gard H1 safety helmet is designed for tower climbing, forestry, rescue, and confined spaces. The V-Gard H1 and accessories provide exceptional comfort and ease of use in a stylish, low-profile design. Experience the latest...

This is the ALTAIR 4/4X Gas Detector Multi-Unit Charger (#10127422) by MSA Safety. This multi-charger can simultaneously charge up to four gas detectors of the ALTAIR 4/4X family. Each Multi-Unit Charger (MUC) contains its own power supply and does not...

Ensuring your workforce wears their safety helmets can be a real headache. MSA, the leading provider of protective helmets, has the perfect remedy: the Fas-Trac® III Suspension. No more pressure headaches. No more pulled hair. No more falling off. No...

The ultimate hard hat for all patriots. Our nation's flag wraps around the hat giving an almost full 360 degrees of patriotic flavor, and centered on the front is a grand replica of the revered American bald eagle. Also a scroll like tag says with pride,...

The V-Gard H2™ Safety Helmet provides superior comfort and versatility while incorporating the latest technology to help protect against lateral impacts. The optional Mips® brain protection system for industrial safety helmets adds another layer of...

With these economical, all-in-one kits from MSA, getting a simple and accurate calibration is no problem! These kits can accommodate two cylinders, regulators, tubing, accessories and instructions. They're houses in a convenient, study case, making is...

This is the ALTAIR 5/5X Gas Detector Multi-Unit Charger (#10127427) by MSA Safety. This multi-charger can simultaneously charge up to four gas detectors of the ALTAIR 5 and 5X family. Each Multi-Unit Charger (MUC) contains its own power supply and does...

Ensuring your workforce wears their safety helmets can be a real headache. MSA, the leading provider of protective helmets, has the perfect remedy: the Fas-Trac III Suspension. No more pressure headaches. No more pulled hair. No more falling off. No more...

Sun Shields extend the brim of  V-Gard and Topgard protective caps all the way around to help protect wearer's ears and neck from sun's rays. Made of ABS (front portion is polycarbonate, smoke tint). Easily attaches to helmets and caps Polyurethane brim...

Put and keep MSA helmets in their place with these comfortable, adjustable chinstraps. Available in two styles; suspension-attached and shell-attached. 2-, 3- and 4-point chinstraps available Non-metal chinstraps keep helmets in place Attaches directly...

The V-Gard H2™ Safety Helmet provides superior comfort and versatility while incorporating the latest technology to help protect against lateral impacts. The optional Mips® brain protection system for industrial safety helmets adds another layer of...

The Altair 10071340 Single-Gas Detector is the smart choice in cost-effective gas detection and has a superior lifespan that can operate for over two years.

The MSA 2 point 3/4" Chinstrap is made from polyester webbing and attaches to the shell of your hardhat. The non-metal chinstrap keeps your helmet in place while you work. This chin strap offers a flexible and adjustable design for long-wearing comfort...

Introducing the ALTAIR 2X gas detector from MSA Safety; the first single gas detector that incorporates industry-leading X-cell® sensor technology in order to deliver unparalleled performance while drastically minimizing total cost of ownership,...

This V-Gard Accessory System offers helmet-mounted frames for various work conditions and user helmets. The sloped design allows liquids, chips and other materials to slide off the frame and away from the line of sight. Each frame, whether used with or...

Ensuring your workforce wears their safety helmets can be a real headache. MSA, the leading provider of protective helmets, has the perfect remedy: the Fas-Trac® III Suspension. No more pressure headaches. No more pulled hair. No more falling off. No...